====== myHIQ Home ======

**myHIQ** is a custom application built for specific projects based on CybroMiniScada. It can be fully customized for end-user needs.

{{gallery> hiq_building_automation:hiq_home:sw:myhiq:examples?3 }}


----


{{hiq_building_automation:hiq_home:sw:myhiq:myhiq.zip|myHIQ demo app}}
===== CyBroMiniScada variables =====

{{hiq_building_automation:hiq_home:sw:myhiq:variables.png?nolink|}}

<WRAP borders>

|<50% 30% 20% >|
^ home controller address  | c+//home controller address// | find on silver sticker on top of HC-HIQ |

<WRAP pagebreak></WRAP>

===== On/Off devices =====

All On/Off devices (lights, managed power sockets, exhaust fans, ...) are controlled by LC-10-IQ device controller. myHIQ application displays device status and allows to toggle device output.

**Device controller variables**

|<50% 15% 15% 20% >|
^  HIQ-DC                            ^   id         ^   output               ^   description             |
^ LC-10-IQ                           | lc00..lc04   | qx00..qx09             | r/w; 0=off, 1=on          |


===== Dimmers =====

Dimmable dvices (lights and some ceiling fans) are controlled by several device controllers, depending on controlled devices:
  * LD-V4-IQ for LED stripes
  * LD-P4-IQ for 230 V dimmable lights and ceiling fans
  * LD-D8-IQ for DALI lights

myHIQ application displays the device's on / off status and output intensity, and allows to control both.

**Device controller variables**

|<50% 15% 15% 20% >|
^  HIQ-DC                            ^   id         ^   output               ^   description             |
^ LD-V4-IQ \\ LD-P4-IQ  \\ LD-D8-IQ  | ld00..ld04   | qx00..qx03             | r/w, 0=off, 1=on          |
^ :::                                | :::          | qw00..qw03             | r/w; 0..100 %             |

===== Blinds =====

Blinds are controlled by a BC-5-IQ device controller.myHIQ application displays and sets the blind position.

**Device controller variables**

|<50% 15% 15% 20% >|
^  HIQ-DC                            ^   id         ^   output               ^   description             |
^ BC-5-IQ                            | bc00..bc01   | qxs00up..qxs04up       | r/o; 0=off, 1=moving up   |
^ :::                                | :::          | qxs00dn..qxs04dn       | r/o; 0=off, 1=moving down |
^ :::                                | :::          | blinds_position_00..04 | r/o; 0..100 %             |
^ :::                                | :::          | blinds_setpoint_00..04 | r/w; 0..100 % , -1=stop   |

===== Scenes =====

Scenes are implemented directly in HIQ-HC. There is no need to use scene controller for using scenes from myHIQ application.

**Home controller variables**

|<50% 15% 15% 20% >|
^  HIQ-HC variable                   ^   id         ^    description                                                  |
| scene_status[0]                    | index=0..31  | r/o; 0=scene inactive, 1=scene active, 255=scene not defined   |
| global_scene_request               | /            | w/o; 0..31=set scene 0..31, -1=idle                            |
| global_memory_request              | /            | w/o; 0..31=memorize scene 0..31, -1=idle                       |

===== Thermostats =====

Temperature regulation is done using TH-1M-IQ, TH-1T-IQ or TH-2-IQ thermostat and FC-1-IQ for fan-coils or HC-IQ for radiators.

**Device controller variables**

|<50% 15% 15% 20% >|
^  HIQ-HC                                                                   ||^  description                                                 |
^ HC-IQ                              | hvac_mode                            || r/w; 0=off, 1=heating, 2=cooling                              |
|                                                                                                                                         ||||
^  HIQ-DC                            ^   id         ^   output               ^   description                                                 |
^ TH-1M-HIQ \\ TH-1T-IQ \\ TH-2-IQ   | th00..th04   | setpoint               | r/w; *0.1 °C (234=23.4 °C)                                    |
^ :::                                | :::          | temperature            | r/o; *0.1 °C (234=23.4 °C)                                    |
^ :::                                | :::          | humidity               | r/o; % RH                                                     |
^ :::                                | :::          | active                 | r/w; 0=inactive (uses idle setpoint), 1=active (use setpoint) |
^ FC-1-IQ                            | fc00..fc04   | valve                  | r/o; 0=off, 1=on                                              |
^ :::                                | :::          | fan_speed              | r/o; 0..3                                                     |