User Tools

Site Tools


en:hems_v1_2_0:introduction

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:hems_v1_2_0:introduction [22.11.2021 13:58]
saso_santelj
en:hems_v1_2_0:introduction [22.11.2021 13:59] (current)
saso_santelj
Line 47: Line 47:
   * measurement of electrical power and energy is provided by single-phase ([[en:hiq_hw:pm1-e-d|PM1-E-D]]) or three-phase ([[en:hiq_hw:pm3-i-d|PM3-I-D]] and [[en:hiq_hw:pm3-e-d-ct|PM3-E-D]]) power sensors which are connected directly to HEMS master controller [[en:hiq_hw:mc-230|MC-230]] or they could be connected wirelessly using [[en:hiq_hw:wm-1|WM-1]] wireless modbus unit.    * measurement of electrical power and energy is provided by single-phase ([[en:hiq_hw:pm1-e-d|PM1-E-D]]) or three-phase ([[en:hiq_hw:pm3-i-d|PM3-I-D]] and [[en:hiq_hw:pm3-e-d-ct|PM3-E-D]]) power sensors which are connected directly to HEMS master controller [[en:hiq_hw:mc-230|MC-230]] or they could be connected wirelessly using [[en:hiq_hw:wm-1|WM-1]] wireless modbus unit. 
   * there are also wireless modules [[en:hiq_hw:en-p1-iq|Metering smart plug]] and [[en:hiq_hw:en-p2-iq|Micro smart plug]] with integrated power sensor to measure consumption and power of consumer,    * there are also wireless modules [[en:hiq_hw:en-p1-iq|Metering smart plug]] and [[en:hiq_hw:en-p2-iq|Micro smart plug]] with integrated power sensor to measure consumption and power of consumer, 
-  * power relays are used for control of managed consumers. They are toggling power supply or enabling signals for the operation of the device. Supported connection is as wired relay or as ([[en:hiq_hw:en-rs2-iq|wireless relay switch]]),+  * power relays are used for control of managed consumers. They are toggling power supply or enabling signals for the operation of the device. Supported connection is as wired relay or as [[en:hiq_hw:en-rs2-iq|wireless relay switch]],
   * push button are used for manual control of managed devices and are directly wired to HEMS master controller.   * push button are used for manual control of managed devices and are directly wired to HEMS master controller.
  
en/hems_v1_2_0/introduction.txt · Last modified: 22.11.2021 13:59 by saso_santelj