en:hems_v1_2_0:methods_resources:firmwareupdate
Table of Contents
Firmware update
CyBroBinLoader software
- Download latest CyBroBinLoader.exe from https://www.cybrotech.com/software-category/tools/
- Run CybroBinLoader.exe
- In case Windows OS is blocking execution, click on “more info” and “run anyway”
Firmware upload
- Download latest HEMS firmware from Download
- Select correct Cybro NAD (sticker on top or side of MC controller)
- Select firmware under PLC program
- Enable PLC program and Start PLC
- Click send
PC must be on the same network as MC controller- Do not interrupt durring update process
- HEMS configuration may be lost, use BACKUP before update and later RESTORE as described under Software
en/hems_v1_2_0/methods_resources/firmwareupdate.txt · Last modified: 28.10.2021 15:22 by neoxy