User Tools

Site Tools


Sidebar


en:hems_v1_2_0:methods_resources:wiring

This is an old revision of the document!


HEMS v1.2.x wiring

MC-230
Wiring of default configuration.
NOTE: several different configurations can be configured with HEMS Configurator.
IOT-L2-2
Network (LAN or LTE 4G modem) → MC-230 and IOT-L2-2
Optionally:
- PC with HEMS configurator
- PV inverter
- Hybrid inverter (battery storage system)
- EV charger
Default connection to the LAN:
Optional LAN connections:
Default connection via LTE 4G modem:
NOTE: All connected devices will have internet access via LTE modem which can result in high costs on your LTE account.
Optional LTE 4G modem connection:
NOTE: Specific network requirements, i.e. static IP address can be configured on the cloud service. Please contact support.
PM3-I-D
PM1-E-D
PM1-E-D-CT
PM3-E-D-CT
WM-1
Power-sensors orientation
Control consumer by external signal
Connect external source to control device, e.g. thermostat signal on IX0 to control temperature by enabling/disabling connected device on QX0.
en/hems_v1_2_0/methods_resources/wiring.1636707234.txt.gz · Last modified: 12.11.2021 09:53 by saso_santelj