User Tools

Site Tools


en:hiq_home:applications:configurator:manual_address

Manual HIQ device controllers address

Download, unzip and run CybroIEXManager CyBroIexManager.

Pres “Scan” button [1] to discover all controllers in LAN. Select HC-IQ serial number on discovered controllers list [2] and press “Scan IEX” button [3]. All HIQ-DC should appear in main list-box [4].

In “New NAD” column [5] enter NAD addresses as per following table:

HIQ-DC order address
LC-10-IQ 1st 100
2nd 101
3rd 102
4th 103
LD-X4-IQ* 1st 120
2nd 121
3rd 122
4th 123
BC-5-IQ 1st 200
2nd 201
SC-4X-IQ 1st 300
2nd 301
3rd 302
4th 303
TH-X-IQ 1st 400
2nd 401
3rd 402
4th 403
5th 404
FC-1-IQ 1st 420
2nd 421
3rd 422
4th 423
5th 424

* LD-D8-IQ is detected as two separate modules.

And press “Send” button [6].

Note: If we press “Autoaddress” then the manual address will be corrupted and must be repeated.

en/hiq_home/applications/configurator/manual_address.txt · Last modified: 05.10.2018 15:07 by goran.kocjancic