User Tools

Site Tools


Sidebar


en:hiq_hw:pm1-wn-d

Wireless DIN rail power sensor

Wireless DIN rail power meter, external power relay switching and consumer measurement

Model number: PM1-WN-D
Mounting: DIN rail, 4M
Dimensions: 72 × 110 × 60 mm
Used for single phase managed consumer
toggling power supply using external power relay
measuring power and energy using clamp-on current transformer

Features

  • Wireless load management, external power-relay control
  • Consumer measurements, clamp-on current transformer

General description

Wireless DIN rail power meter PM1-WN-D is a DIN rail mounted control unit. It can switch on/off an external power-relay and measure active power and energy consumption.

This device has to be directly and continuously main powered. For network purposes, it is a Router (Repeater) i.e. it has function of maintaining radio traffic from and to other similar devices and it can also act as a parent device for battery-powered sensors of the same family.

Technical specifications

POWER SUPPLY 85-250 Vac; 50/60 Hz
WIRELESS CHARACTERISTICS 2405 MHz ÷ 2480 MHz
DSSS Modulation
Nominal transmission Power +3dBm
IEEE 802.15.4 compliant
Stack EmberZNet3.5.x
Stack version 0
Proprietary profile ID
Proprietary encryption key
MEASURES Energy consumed [Wh]
Active Power [W]
Time of measurement [sec]
MAXIMUM LOAD 15 kW
RELAY CHARACTERISTICS Contacts 10A 250V (resistive load)
CONNECTIONS Terminal blocks
OPERATING CONDITIONS -10 + 55 °C
PROTECTION CLASS IP30

Terminals

PM1-WN-D
MAINS 16 Power source L
17 N
CT 2 Current transformer black
3 red
Relay 6 Power relay coil power supply
7 coil

Connection

en/hiq_hw/pm1-wn-d.txt · Last modified: 21.08.2019 11:38 by goran.kocjancic