Differences

This shows you the differences between two versions of the page.

--- en:3s:tof_settings [2020/06/22 10:25] – vidb
+++ en:3s:tof_settings [2020/07/27 10:53] (current) – vidb
@@ Line 3: / Line 3: @@
 TOF sensor must be installed facing down above entrance to the area you want to count people in or out of. The counter works by detecting when a person crosses an invisible count line that has been configured in settings.
-To access these setting, type http://x.x.x.x/login in browser; x.x.x.x being the device's IP address. On the site, login is required. When inside, the Summary menu opens. Change the menu to Settings. Select the Counting sub-menu. This menu is for configuring counting functionality.
+To access these setting, type http://x.x.x.x/login in browser; x.x.x.x being the device's IP address. On the site, login is required. When inside, the Summary menu opens.
+{{:en:3s:tof1.png?1000|}}
+Change the menu to Settings. Select the Counting sub-menu. This menu is for configuring counting functionality. To enable moving the lines, enable Edit mode in the upper left corner.
+{{:en:3s:tof2.png?1000|}}
 Configure the count lines so that people are counted accurately. When positioning the lines, always ensure that there is enough ‘initialisation’ space for the counter to recognise a person and start tracking them – lines should be positioned away from the edge of the field of view.