Differences

This shows you the differences between two versions of the page.

--- en:hems:methods_resources [2018/10/09 11:09] – goran.kocjancic
+++ en:hems:methods_resources [2019/02/25 11:25] (current) – saso_santelj
@@ Line 1: / Line 1: @@
 ====== HEMS G2 Methods & Resources ======
+^ [[en:hems:methods_resources:safety|Safety instructions]]         | HEMS G2 Safety instructions         |
 ^ [[en:hems:methods_resources:wiring|Wiring]]                      | HEMS G2 wiring principles         |
 ^ [[en:hems:methods_resources:commissioning|Commissioning]]        | HEMS G2 commissioning             |
-===== SAFETY INSTRUCTION =====
-**Before start with installation, assembly, disassembly, inspection, or any other operation read safety instructions. They contain general safety information for devices approved by Robotina d.o.o..**
-{{:en:hems:methods_resources:warning.png?nolink|}} **DANGER!**
-**Disregard manufacturer's safety instructions could result in material damage, injury or even death.**
-{{:en:hems:methods_resources:el_warning.png?nolink|}} {{:en:hems:methods_resources:warning.png?nolink|}} **DANGER!**
-**During operation is device under load!**
-{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING!**
-**Before installation, disassembly, inspection, or any other operation, make sure that the device is disconnected from the power supply and that with your doing you don’t endanger yourself or others.**
-{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING!**
-**Don’t try to open the device.
-Any interference or change may impact device’s properties and significantly affect safety.**
-{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING!**
-**Before connecting device to the power supply, assure that all wires are connected in accordance with the manufacturer's instructions.**
-Before continue with installation read the manufacturer's installation requirements:
-  * Installation and electrical connection of the equipment described in this manual must be carried out by qualified or authorized personnel.
-  * The device must be installed inside the electric box where cannot endanger people or environment.
-  * During the operation device must not be exposed to humidity, dust, mold or other weather phenomena.
-  * All connected wires must comply with manufacturer's specifications.
-  * For installation use only verified electrical-installations tools.
-  * Around the device has to be assured sufficient ventilation space.
-  * The manufacturer does not undertake any liability for material or personal damage resulting from use or handling which is not in accordance with the manufacturer's safety instructions.