Differences

This shows you the differences between two versions of the page.

--- en:hiq_hw:pm3-e-d-ct [2019/07/25 12:28] – created goran.kocjancic
+++ en:hiq_hw:pm3-e-d-ct [2021/11/19 11:24] (current) – gdzampo
@@ Line 1: / Line 1: @@
-====== Power sensor ======
+====== Three phase power sensor, CT ======
+**3-phase power-sensor, current transformer**
+<WRAP column 350px>
+{{  :hiq_energy:hems:hardware:pm3-e-d_ct.png?nolink  |}}
+</WRAP>
+<WRAP column 300px>
+| Model number: ^ PM3-E-D-CT                                   |
+| Connect to:   | [[en:hiq_hw:mc-230|MC-230]]           |
+| :::           | RS485 power sensor bus A - B                 |
+| Mounting:     | DIN rail, 1M, 18 mm                          |
+| Dimensions:   | 65 × 72 × 94,5 mm                             |
+^ Used for measuring power and energy of                 ||
+| ✔ | single/three-phase energy sources                        |
+| ✔ | single/three-phase energy consumers                      |
+</WRAP>
+<WRAP clear></WRAP>
+===== Applications =====
+  * Digital multi-function power sensor for single/three phase networks
+===== Features =====
+  * DIN rail mounting with 3x current transformers ([[en:hiq_hw:ct-3-e-xx|3-ph current transformer]])
+  * Line voltage and THD% (total harmonic distortion) of all phases
+  * Line Frequency
+  * Currents, Current demands and current THD% of all phases
+  * Power, maximum power demand and power factor
+  * Active energy imported and exported
+  * Reactive energy imported and exported
+===== General description =====
+The unit measures and displays the characteristics of three phase four wires(3p4w) supplies, including voltage, frequency, current, power, active and reactive energy, imported or exported.
+ Energy is measured in terms of kWh, kVArh. Maximum demand current can be measured over preset periods of up to 60minutes.
+In order to measure energy, the unit requires voltage and current inputs in addition to the supply required to power the product.
+The requisite current input(s) are obtained via current transformers (CT).
+This power sensor can be configured to work with a wide range of CTs with 0.33V output, giving the unit a wide range of operation. Built-in interfaces provide pulse and RS485 Modbus RTU outputs. Configuration is password protected.
+This power sensor can be powered from a separate auxiliary (AC or DC) supply. Alternatively, it can be powered from the monitored supply, where appropriate.
+===== Technical specifications =====
+|< 35% 40% >|
+^ Technical Data                                                               ||
+| Operating Humidity             |                                        ≤ 75% |
+| Storage Humidity               |                                        ≤ 95% |
+| Operating Temperature          |                                -25°C - +50°C |
+| Storage Temperature            |                                -40°C - +70°C |
+| Mounting                       |                         DIN rail (DIN 43880) |
+| Sealing                        |                                  IP51 Indoor |
+| Auxiliary supply voltage       |                                 Nominal ± 1% |
+| Auxiliary supply frequency     |                                 Nominal ± 1% |
+| Frequency                      |                            50Hz or 60Hz(±2%) |
+| Power Consumption              |                                        ≤ 10W |
+^ Accuracy                                                                     ||
+| Voltage, Current               |                                         0.5% |
+| Frequency                      |                        0.2% of Mid-Frequency |
+| Power Factor                   |                           1% of Unity (0.01) |
+| Active Power, Apparent Power   |                        ± 1% of Range Maximum |
+| Reactive Power                 |                        ± 1% of Range Maximum |
+| Reactive Energy (Varh)         |                        ± 1% of Range Maximum |
+| Active Energy (Wh)             |                          Class 1 IEC 62053-21|
+^ Current transformer                                                          ||
+| Frequency                      |                                     50-60 Hz |
+| Rated current                  |                                         50 A |
+| Accuracy                       |            from 20% to 120% of rated current |
+| Phase angle                    |  less than 2 degrees at 50% of rated current |
+| Insulation voltage             |                                      600 VAC |
+| Maximum primary voltage        |               5000 VAC (insulated conductor) |
+| Dielectric strength            |                              2.5 kV/1mA/1min |
+| Operating temperature          |                                  -15 to 60°C |
+| Operating humidity             |                                       < 85 % |
+| Case material                  |                                   PC/UL94-V0 |
+| Bobin                          |                                          PBT |
+| Core                           |                                    Permalloy |
+| Internal structure             |                                        Epoxy |
+| Leads                          |                UL 1015, Twisted pair, 22 AWG |
+^ Modbus                                                                       ||
+| Bus Type                       |                          RS485 (Semi-Duplex) |
+| Protocol                       |                                   Modbus RTU |
+| Baud Rate                      |                       1200/2400/4800/9600bps |
+| Address Range                  |                                        1-247 |
+| Max. Bus Loading               |                                        64pcs |
+| Communication Distance         |                                  1000 Meters |
+| Parity                         |                                EVEN/ODD/NONE |
+| Data Bit                       |                                            8 |
+| Stop Bit                       |                                            1 |
+<WRAP pagebreak></WRAP>
+===== Dimensions =====
+{{:hiq_energy:hems:hardware:pm3-e_ct_dimensions.png?nolink|}}
+===== Installation =====
+{{:hiq_energy:hems:hardware:pm3-e_instalation.png?nolink|}}
+{{ :hiq_energy:hems:hardware:hiq_pm3-e-d-ct_user_manual_v1.pdf |}} {{ :hiq_energy:hems:hardware:hiq_pm3-e-d-ct_protocol_v1.6.pdf |}}