User Tools

Site Tools

Trace:
en:hiq_hw:rdx_charger

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
en:hiq_hw:rdx_charger [2023/01/20 13:43] – created gdzampoen:hiq_hw:rdx_charger [2023/01/30 15:01] (current) – removed gdzampo
Line 1: Line 1:
-====== RDX Charger====== 
  
- 
- 
-<WRAP column 300px> 
- 
-{{hiq_hardware:rdx_charger_wiki.png}}   
- 
-</WRAP> 
- 
-<WRAP column 350px> 
- 
-|< 100% 73% 27% >| 
-| Description ^ Order Code                                              | 
-| Robotina Dynamic Charger with type 2 cable and RFID card reader  ^ RDX-RF                                            | 
-| Robotina Dynamic Charger with type 2 cable, RFID card reader and residual current device ^ RDX-RF-R                                              | 
-| Robotina Dynamic Charger with type 2 cable, RFID card reader and IOT Linker^RDX-RF-I                                             | 
-| Robotina Dynamic Charger with type 2 cable, RFID card reader, residual current device and IOT linker^RDX-RF-RI                                  | 
-| Robotina Dynamic Charger with type 2 cable and QR code reader  ^ RDX-QR                                            | 
-| Robotina Dynamic Charger with type 2 cable, QR code reader and residual current device ^ RDX-QR-R                                              | 
-| Robotina Dynamic Charger with type 2 cable, QR code reader and IOT Linker^RDX-QR-I                                             | 
-| Robotina Dynamic Charger with type 2 cable, QR code reader, residual current device and IOT linker^RDX-QR-RI                                  | 
-                                    
- 
- 
-</WRAP> 
- 
-<WRAP clear></WRAP> 
- 
-===== Features ===== 
- 
-  * **Up to 22kW of charging power** 
-  * **Modern design with IP54 & IK10 standard** 
-  * **Suitable for indoor and outdoor use** 
-  * **Coloured LED light indicates charging status** 
-  * **Easy operability with one button on housing for charging modes & stop ** 
-  * **Monitor & control charger operation via web-based cloud interface** 
-  * **Compatible with 3rd party software** 
-  * **Secure charger with remote locking option** 
-  * **Save by charging (economy charging) during off-peak hours** 
-  * **Charge with surplus energy (solar & wind energy)** 
-  * **Priority charging at the highest possible power** 
-  * **Dynamic load balancing keeps consumption power below max allowed (protect grid fuse/s)** 
-  * **Manage charging of electric vehicles (EV fleet)** 
-  * **Remote control of key consumers (heat pump, battery storage system,)** 
-  * **6mA DC residual current, overvoltage and undervoltage protection** 
-  * **RFID or QR access control to allow authorized usage only** 
-  * **Long range wireless power sensors for installation without cabling** 
-  * **Fully compliant with IEC 61851** 
- 
- 
- 
- 
-<WRAP pagebreak></WRAP> 
- 
- 
- 
-=====  Introduction =====  
- 
-**PLUG IN & GO** \\ 
-Simply connect vehicle to charge and unplug to drive.\\  
-//RDX Charger// makes charging as easy as possible by enabling of charging using button on housing or by application on cloud.  
- 
-**BUTTON & LED on housing** \\ 
-  * charging starts automatically as soon as vehicle is connected with power cable 
-  * press button to stop charging, press again to restart 
-  * press and hold button to activate priority charging  
-  * LED light indicates charging status 
-  * operating with button doesn't require active application \\ 
-//*Button on housing and "button" on cloud application share same functionality. It doesn’t matter which one is used.// 
- 
- \\   
-{{:hiq_energy:rdx_charger:robotina_charger_descr_01.png?direct&400|}} 
- \\   
- 
-**RFID or QR** \\ 
-  * authentication for users  
-  * charging starts after authentication is successful 
-  * RFID or QR reader could be installed on housing, both is not possible. 
- 
-**LOCKED ** \\ 
-  * disable unauthorized use of charging station 
-  * locked is deactivated by authorized RFID card, key fob or by cloud application 
- 
-**ECONOMY CHARGING**\\ 
-  * allows charging with a current set by user 
-  * charging at low tariff only (depending on table set by user) 
-  * charging by surplus energy only or in combination with grid power 
- 
-**PRIORITY CHARGING** \\ 
-  * Utilize all available power to charge as fast as possible 
-  * In case of //Dynamic load balancing// temporary suspends high-power loads to increase available power for charging simultaneously keeping total power below max allowed power 
- 
- 
- 
- 
-^ LED indicator                                   ^ Steady light                     ^ Flashing light   ^ 
-| {{ :hiq_energy:rdx_charger:white_ring.png }} | EV not connected | Paused by EVSE (short press to unpause)              | 
-| {{ :hiq_energy:rdx_charger:yellow_ring.png }} | EV connected, not charging | Paused by EVSE (short press to unpause)| 
-| {{ :hiq_energy:rdx_charger:blue_ring.png }} | EV connected, charging | /              | 
-| {{ :hiq_energy:rdx_charger:green_ring.png }} | EV connected, charging ended | / | 
-| {{ :hiq_energy:rdx_charger:red_ring.png }} | / | Error | 
-| {{ :hiq_energy:rdx_charger:magenta_ring.png }} | / | Locked| 
-| {{ :hiq_energy:rdx_charger:cian_blue_ring.png }} | / | Priority charging | 
-| {{ :hiq_energy:rdx_charger:cian_yellow_ring.png }} | / | Priority charging paused | 
-| {{ :hiq_energy:rdx_charger:cian_green_ring.png }} | / | Priority charging ended | 
- 
- 
- ===== Technical specifications ===== 
- 
-| Nominal voltage     |     1x230Vac 50/60Hz, 3x230/400Vac 50/60Hz| 
-| Maximum current |             1x32A, 3x32A| 
-| Maximum charging power |             22kW| 
-| Connector          |  Type2, 5m cable| 
-| Network connection         |  Ethernet 100M RJ45| 
-| Ingress protection   |            IP54| 
-| Impact resistance     |         IK10| 
-| Operating temperature       |           -20°C to +45°C| 
-| Storage temperature  |                       -40°C to + 70°C| 
-| Charging pilot negative  |                     1mA, 20ms reaction time|    
-| Residual direct current  |                     6mA, 200ms reaction time|    
-| Standards   |                      IEC 61851|    
- 
-===== Dimensions ===== 
- 
-{{hiq_hardware:rdx_charger_dimensions.png}}  
- 
- 
-===== Cable holder mounting options ===== 
- 
-{{hiq_energy:rdx_charger:montaza_6.png}}\\ 
- 
-===== Accessories ===== 
- 
- 
-| **Description**     |     **Order Code**| 
-| Wireless external single-phase Power sensor kit|            **WPM1-E-D**| 
-| Wireless external three-phase Power sensor kit |             **WPM3-E-D**| 
-| External single-phase Power sensor|            **PM1-E-D**| 
-| External three-phase Power sensor|             **PM3-E-D**| 
-| Wireless Modbus bridge |  **WM-1**| 
-| Wireless relay, to control other loads in the building |  **WR-1**| 
-| Protective roof      |  **RDX-PR**| 
-| Freestanding set   |            **RDX-FS**| 
-| 4G LTE modem for IOT linker **This option is only possible for RDX Charger models that already have an integrated IOT linker**|            **IOT-L2-W**| 
en/hiq_hw/rdx_charger.1674222223.txt.gz · Last modified: by gdzampo