Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.
Currently locked by: 10.0.0.202,18.118.82.141
Lock expires at: 2025/04/20 00:08 (8 min)
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== HEMS G2 Configurator ======

{{ :hiq_energy:hems:methods_resources:hems_configurator_v1.1.1.exe|HEMS Configurator}}

===== home =====

Basic system overview.

<WRAP column 650px>

{{  :hiq_energy:hems:hems_configurator_-_home.png?direct&800|}} 

</WRAP>

<WRAP column 650px>

|< 100% 120px 100px>|
^ 1. Grid                                                                                                             |||
|  **›**                | From grid  | Tariff (LO, HI, D-LO, D-HI) and power from grid in W                             |
|  :::                  | :::        | Imported energy by tariff in Wh                                                  |
|  **‹**                | To grid    | Power exported to grid in W                                                      |
|  :::                  | :::        | Exported energy in Wh                                                            |
^ 2. Plants                                                                                                           |||
|  **‹**                | Produced   | Produced power in W and energy in Wh                                             |
|  **›**                | Consumed   | Consumed power in W and energy in Wh                                             |
^ 3. Storage systems                                                                                                  |||
|  **‹**                | Sourced    | Power in W and energy in Wh sourced from storage (battery)                       |
|  **›**                | Stored     | Power in W and energy in Wh stored (to battery)                                  |
|  **bargraph and %**¹  | SOC        | Battery State Of Charge                                                          |
^ 4. Consumers                                                                                                        |||
|  **›**                | Consumed   | Consumed power in W and energy in Wh                                             |
|  **[]**               | Status     | Output status for managed consumers                                              |
|  **bargraph**²        | Analog out | Analog output value                                                              |
|  **click**            | Toggle     | Click in frame toggles managed consumers output                                  |
|  **long-press**²      | Set analog | Long press on first consumer pops-up dialog for analog value set                 |
^ 5. Unknown source                                                                                                   |||
|  **›**                | Sourced    | Power in W and energy in Wh from unknown source                                  |
|   :!: Accumulate also all differences caused by power-sensor inaccuracy                                             ||| 
^ 6. Other consumers                                                                                                  |||
|  **›**                | Consumed   | Consumed power in W and energy in Wh by other (not measured) consumers           |
^ 7. Temperature and humidity                                                                                         |||
|                       | Temperature| Temperature in ºC                                                                |
|                       |  Humidity  | Humidity in % RH                                                                 |

¹ only for eStore

² only for first managed consumer

</WRAP>

<WRAP clear></WRAP>

<WRAP pagebreak></WRAP>

===== power =====

Overview of current power distribution by source / consumer.

<WRAP column 650px>

{{:hiq_energy:hems:hems_configurator_-_power 1.png?direct&800|}}

</WRAP>

<WRAP column 650px>

|< 100%>|
^ 1. Sourced power                                                   |
| Sourced power for each source                                      |
| Sums per source type                                               |
| Total of all sourced power                                         |
^ 2. Consumed power                                                  |
| Power for each consumer                                            |
^ 3. Power distribution                                              |
| Partial distributed power                                          |

</WRAP>

<WRAP clear></WRAP>

<WRAP column 650px>

{{:hiq_energy:hems:hems_configurator_-_power 2.png?direct&800|}}

</WRAP>

<WRAP column 650px>

|< 100%>|
^ 1. Sourced power distribution                                      |
| How sourced power is consumed by each consumer                     |
^ 2. Consumed power distribution                                     |
| Who sources consumed power                                         |

</WRAP>

<WRAP clear></WRAP>

<WRAP pagebreak></WRAP>

===== energy =====

Energy overview of a given time distributed by sources / consumers.

<WRAP column 650px>

{{:hiq_energy:hems:hems_configurator_-_energy.png?direct&800|}}

</WRAP>

<WRAP column 650px>

|< 100%>|
^ 1. Sourced energy                                                  |
| Sourced energy for each source                                     |
| Sums per source type                                               |
| Total of all sourced energy                                        |
^ 2. Consumed energy                                                 |
| Energy for each consumer                                           |
^ 3. Energy distribution                                             |
| Partial distributed energy                                         |
^ 4. Energy since                                                    |
| Date and time since energy is recorded                             |
^ 5. Reset all                                                       |
| Long-press to reset all energy counters                            |

</WRAP>

<WRAP clear></WRAP>

<WRAP pagebreak></WRAP>

===== timetable =====

Weekly timetable for managed consumers.

<WRAP column 650px>

{{:hiq_energy:hems:hems_configurator_-_timetable.png?direct&800|}}

</WRAP>

<WRAP column 650px>

|< 100%>|
^ 1. Managed load menu                                               |
| Switch between managed loads                                       |
^ 2. Enable checkbox                                                 |
| When un-checked timetable is not executed                          |
^ 3. Events grid                                                     |
| Events displayed in weekly grid (15 min resolution)                |
| Click to select time and set event by clicking buttons below       |
^ 4. Once actions (top priority timetable actions)                   |
| Actions are executed and then automatically cleared.               |
| "Disable" action will just disable recurring action.               |
^ 5. Recurring actions (low priority actions)                        |
| Actions are executed each week.                                    |
^ 6. Analog out                                                      |
| Action to set analog output. Analog actions are recurring.         |
^ 7. Cloud optimization                                              |
| When enabled (checked) cloud optimization is enabled.              |

</WRAP>

<WRAP clear></WRAP>

<WRAP pagebreak></WRAP>

===== tariff =====

Weekly tariff timetable for grid energy per tariff distribution.

<WRAP column 650px>

{{:hiq_energy:hems:hems_configurator_-_tariff.png?direct&800|}}

</WRAP>

<WRAP column 650px>

|< 100%>|
^ 1. Tariff grid                                                                     |
| Graphical weekly timetable with tariffs.                                           |
| Click to select term, click-and-drag to select multiple terms.                     |
^ 2. Low tariff                                                                      |
| Set low tariff for selected terms.                                                 |
^ 3. High tariff                                                                     |
| Set high tariff for selected terms.                                                |


</WRAP>

<WRAP clear></WRAP>

<WRAP pagebreak></WRAP>

===== settings =====

Easy and intuitive system setup.

<WRAP column 650px>

{{:hiq_energy:hems:hems_configurator_-_settings.png?direct&800|}}

</WRAP>

<WRAP column 650px>

|< 100% 100px 100px>|
^ 1. System settings                                                                                                                                                            |||
|  [ autodetect ]                  || Click to find HEMS G2 in local network                                                                                                      |
|  eStore              | c.....     | eStore serial number (automatically detected or can be entered manually).                                                                   |
| :::                  | [] enable  | When checked HEMS will read Grid, first plant and first Storage directly from eStore (so there is no need to duplicate power-sensor).       |
| :::                  | [detect]   | eStore address is cleared and new eStore can be detected.                                                                                   |
|  HIQ Home            | c.....     | HIQ Home serial number (automatically detected or can be entered manually).                                                                 |
| :::                  | [] enable  | When checked HEMS will read Grid power and energy from HIQ Home (so there is no need to duplicate power-sensor).                            |
| :::                  | [detect]   | HIQ Home address is cleared so new can be detected.                                                                                         |
^ 2. Internet access                                                                                                                                                            |||
|  [] enable           | When checked HEMS is automatically connected to HIQ Universe cloud service. The connection is initialized by the HEMS system and uses UDP packets on port 8442. ||
|  [test]              | New "push" message is sent to server and roundtrip time is rechecked.                                                                                   ||
|  [reset]             | Clear messages counts and roundtrip time                                                                                                                ||
|  push timer          | Timer in s for send "push" message to server                                                                                                            ||
|  messages            | Sent "push" messages / responses counters                                                                                                               ||
|  roundtrip           | Time in ms between sent push message and response.                                                                                                      ||
^ 3. Sources and Consumers settings table                                                                                                                                       |||
|      SOURCES             | Source name                                                                                                                                         ||
|      icon                | Source icon                                                                                                                                         ||
|  source management       | Source power-sensor management                                                                                                                      ||
| :::                      |   message  | Messages regarding source power-sensor                                                                                                  |
| :::                      |   add      | Associate new power-sensor to source                                                                                                    |
| :::                      |   del      | Disassociate power-sensor from source & configure it as new power-sensor                                                                |
|      meter               | Source power-sensor type                                                                                                                            ||
| :::                      |  in/ex     | Power plant connected¹                                                                                                                  |
|    new device            | Power-sensor configured as new one detected or wireless module configuration²                                                                       ||
|  Wireless setting        | Setting up wireless modules: pairing, adding and delete the wireless modules  and  setting repeater level                                                                                                                         || 
|      CONSUMERS           | Consumer name                                                                                                                                       ||
|      icon                | Consumer icon                                                                                                                                       ||
|  consumer management     | Consumer meter and output management                                                                                                                ||
| :::                      |   message  | Messages regarding consumer meter and output                                                                                            |
| :::                      |   add      | Associate new power-sensor or new wireless module² to consumer                                                                          |
| :::                      |   del      | Disassociate power-sensor or wireless module² from consumer & configure it as new power-sensor or new wireless module²                  |
|      meter               | Consumer meter type                                                                                                                                 ||
|      output              | Consumer output type                                                                                                                                ||
| :::                      |   ‹‹·››    | Setting repeater level³                                                                                                                   |
|    man. time             | Manged consumer manual override timer                                                                                                               ||
|    out mode              | Manged consumer output mode (normal or inverted)                                                                                                    ||
|    timetable             | Manged consumer timetable execution enabled                                                                                                         ||
^ 4. Permanent memory parameters                                                                                                                                                |||
|  [init parameters]       | Init all parameters to default value                                                                                                                ||
|  [save parameters]       | Save all parameters to permanent memory                                                                                                             ||
|  [read parameters]       | Read all parameters from permanent memory                                                                                                           ||
|  [] autosave parameters  | Parameters will be automatically saved to permanent memory in 15 minutes after last parameter change                                                ||
^ 5. Backup / Restore to PC                                                                                                                                                     |||
|  [backup]                | Backup all parameters to PC                                                                                                                         ||
|  [restore]               | Restore all parameters from PC backup                                                                                                               ||

¹ only for the first power plant

² wireless setting must be enabled

³ only for wireless modules and wireless setting must be enabled

</WRAP>

<WRAP clear></WRAP>