✎ en:hems:universe:api []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

===== Application Programming Interface (API) =====

==== Direct loads control ====

| ''man_load_set[i]''   | bit | R/W | Managed load state; 0=off, 1=on; i = 10..17 |
| ''man_analog_out[i]'' | int | R/W | Analog output value in % i = 10         |

==== Timetable loads control ====
Writes 'Once' and/or 'Recurring' actions to in consumer timetables defining consumer's behavior at specific time intervals.

| ''tt_load_set[i]''   | bit | R/W | 'Once' and 'Recurring' actions; i = 10..17 |
| ''tt_analog_out[i]'' | int | R/W | Set analog output value in %; i = 10      |

===== Cloud Optimization (Consumers timetable) =====
**Cloud optimization** allows writes from Cloud/Edge to consumer timetables, changing consumer's behavior during specific time periods (e.g. Smart Grid functionality).\\
Following table and use cases below explain the usage of variables in different scenarios.

^ Variables ^ Description ^
| ''dr_load_set[10..17]''             | Direct load control: 0=off, 1=on. |
| ''timetable_cloud_once[0..7]''      | Enables executing 'Once' actions from Cloud: 1=enabled. |
| ''timetable_cloud_recurring[0..7]'' | Enables executing 'Recurring' actions from Cloud: 1=enabled. |
| ''timetable_cloud_analog[0]''       | Enables writing analog values from Cloud to timetable: 1=enabled. |
| ''optimization_command[0..50]''     | cloud timetable optimization command: 1=set once action, 2=set recurring action, 3=set critical peak tariff, 4=set mask, 5=set analog. |
| ''optimization_value[0..50]''       | timetable optimization value (depends of command): -1=clear/clear critical peak tariff, 0=set off/lo tariff, 1=set on/hi tariff, 2=set critical peak tariff, -100..100 set setpoint, -32768=auto). |
| ''optimization_start[0..50]''       | cloud timetable optimization start time 'hhmmw': hh=hour, mm=minute, w=weekday (1..7, 1=monday). |
| ''optimization_index[0..50]''       | timetable optimization index (0..8): 0=broadcast, 1=first consumer timetable, 8=last consumer timetable. |
| ''optimization_time[0..50]''        | timetable optimization period [min.] (max 1440 minutes). |

Variable ''optimization_command'' triggers timetable manipulation process so make sure to set all other variables before.

==== Use cases ====
<wrap hi>**SCE01**</wrap> **Set once action**\\
Consumer [3] has to be switched off on Wednesday at 16:45 and be in this state for 1 hour.
<code>
if ( timetable_cloud_once[3] ) {   // 4. consumer (idx=3)
  optimization_index[0] = 4;       // 4. consumer (idx=3)
  optimization_start[0] = 16453;   // hh=16, mm=45, w=3
  optimization_time[0] = 60;       // 1 hour
  optimization_value[0] = 0;       // set off
  optimization_command[0] = 1;     // set once action
};

// Result:
//                 ^xxx
//      |---|---|---|---|---|
// ...  14  15  16  17  18  19  ... 
</code>

<wrap hi>**SCE02**</wrap> **Set recurring action**\\
Consumer [7] has to be switched on every Monday@08:00 and switched off every Monday@21:00.
<code>
if ( timetable_cloud_once[7] ) {   // 8. consumer (idx=7)
  // action on
  optimization_index[0] = 8;       // 8. consumer (idx=7)
  optimization_start[0] = 8001;    // hh=08, mm=00, w=1
  optimization_time[0] = 15;       // only one action
  optimization_value[0] = 1;       // set on
  optimization_command[0] = 2;     // set recurring action
  // action off
  optimization_index[1] = 8;       // 8. consumer (idx=7)
  optimization_start[1] = 21001;   // hh=21, mm=00, w=1
  optimization_time[1] = 15;       // only one action
  optimization_value[1] = 2;       // set off
  optimization_command[1] = 2;     // set recurring action
};

// Result:
//                                      ^                                                   ˇ
//      |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
// ...  00  01  02  03  04  05  06  07  08  09  10  11  12  13  14  15  16  17  18  19  20  21  22  23    ... 
</code>

<wrap hi>**SCE03**</wrap> **Set mask**\\
Consumer [0] has to be switched on/off following this pattern:
Saturday\\
@11:15 on\\
@11:45 off\\
@12:00 on\\
@13:30 off\\
@13:45 on\\
@14:00 off\\

<code>
if ( timetable_cloud_once[0] ) {   // 1. consumer (idx=0)
  optimization_index[0] = 1;       // 1. consumer (idx=0)
  optimization_start[0] = 11156;   // hh=11, mm=15, w=6
  optimization_time[0] = 180;      // from 11:15 to 14:00 + 15min = 180 minutes
  optimization_value[0] = 1531;    // mask: 2#010111111011
  optimization_command[0] = 4;     // set mask
};

// Result:
//                                              lsb    <--   msb
//                                                110111111010
//
//                                                ^xˇ^xxxxxˇ^ˇ
//   |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
//   00  01  02  03  04  05  06  07  08  09  10  11  12  13  14  15  16  17  18  19  20  21  22  23    
</code>

<wrap hi>**SCE04**</wrap> **Set analog**\\
Consumer [0] is the only consumer with analog output. Analog value range is 0..100%.\\
From Tuesday@14:00 until Tuesday@15:00 set output to 75%.

<code>
if ( timetable_cloud_analog[0] ) {   // 1. consumer (idx=0)
  optimization_index[0] = 1;         // 1. consumer (idx=0)
  optimization_start[0] = 14002;     // hh=14, mm=00, w=2
  optimization_time[0] = 60;         // 60 minutes
  optimization_value[0] = 75;        // 75%
  optimization_command[0] = 5;       // set analog
};

// Result:
//   ________________________________________________________----_____________________________________
//
//   |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
//   00  01  02  03  04  05  06  07  08  09  10  11  12  13  14  15  16  17  18  19  20  21  22  23    
</code>

<wrap hi>**SCE05**</wrap> **Set tariff**\\
Set high tariff (HT) from 06:00 until 22:00, for Friday.
<code>
optimization_start[0] = 6005;     // hh=06, mm=00, w=5
optimization_time[0] = 960;       // only one action
optimization_value[0] = 1;        // hight tariff
optimization_command[0] = 3;      // set tariff

// Result:
//   ________________________----------------------------------------------------------------_________
//
//   |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
//   00  01  02  03  04  05  06  07  08  09  10  11  12  13  14  15  16  17  18  19  20  21  22  23    
</code>

<wrap hi>**SCE06**</wrap> **Delete actions from timetable**\\
Clear actions made in SCE01.
<code>
if ( timetable_cloud_once[3] ) {   // 4. consumer (idx=3)
  optimization_index[0] = 4;       // 4. consumer (idx=3)
  optimization_start[0] = 16453;   // hh=16, mm=45, w=3
  optimization_time[0] = 60;       // 1 hour
  optimization_value[0] = -1;      // clear
  optimization_command[0] = 1;     // set once action
};

// Result:
//
//      |---|---|---|---|---|
// ...  14  15  16  17  18  19  ... 
</code>

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International