✎ en:hems_v1_2_0:download:firmwareupdate []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Firmware update ======

===== CyBroBinLoader software =====
  * Download latest CyBroBinLoader.exe from https://www.cybrotech.com/software-category/tools/
  * Run CybroBinLoader.exe
  * In case Windows OS is blocking execution, click on "more info" and "run anyway"

{{ hiq_energy:hems_v1_2_0:cybrobinloader.png?nolink&0x140        }}

===== Firmware upload =====

* Download latest HEMS firmware from [[en:hems_v1_2_0:download|Download]]
  * Select correct Cybro NAD (sticker on top or side of MC controller)
  * Select firmware under PLC program
  * Enable PLC program and Start PLC
  * Click send
  * :!: PC must be on the same network as MC controller
  * :!: Do not interrupt durring update process
  * :!: HEMS configuration may be lost, use BACKUP before update and later RESTORE as described under [[en:hems_v1_2_0:software#settings|Software]]
 
{{ hiq_energy:hems_v1_2_0:cybrobinloader_selectnad.png?nolink }}

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International