✎ en:hiq_home:methods:commissioning:firmware []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

~~NOTOC~~ 
===== Firmware =====

==== HC-IQ FW update ====

|<800px 50% 30% 20% >|
| Download and save CyPro IDE                                                                            ||  {{hiq_building_automation:hiq_home:sw:cypro.exe|CyPro}} or {{hiq_building_automation:hiq_home:sw:cypro.zip|CyPro.zip}} (v2.8.0)  |
| Run and install it                                                                                     || :::                                                                                           |
| Download and open project                                                                              ||  {{hiq_building_automation:hiq_home:sw:hc-iq.cyp|}} (v1.2.9a) or \n {{hiq_building_automation:hiq_home:sw:hc-iq-v1214.cyp|}} (v1.2.14)                                       |
| Find Home Controller NAD (sticker on top of HC)                                                        ||  {{hiq_building_automation:hiq_home:sw:hc-nad.jpg?direct&200|}}                               |
| Select Home Controller                                           | right click on NAD                   |  {{hiq_building_automation:hiq_home:sw:cypro_add_nad_1.png?direct&200 |}}                     |
| Enter NAD                                                        | :::                                  |  {{hiq_building_automation:hiq_home:sw:cypro_add_nad_2.png?direct&200 |}}                     |
| If HC does not have the latest Kernel you have to send a new one.| Tools -> Kernel maintenance...       |  {{hiq_building_automation:hiq_home:sw:kernel.jpg?direct&200|}}                               |
| Send kernel to HC-IQ.                                            | Select [Send] and then [Close]       |  {{hiq_building_automation:hiq_home:sw:kernel_maintenance.jpg?direct&200|}}                   |
| Send Program                                                     | Program -> Send [F9]                 |  {{hiq_building_automation:hiq_home:sw:send_fw_to_hc.png?direct&200|}}                        |
| Start PLC program                                                | Program -> Start PLC [F11]           |  {{hiq_building_automation:hiq_home:sw:run_hc.png?direct&200|}}                               |

==== HIQ-DC FW update ====

|<800px 50% 30% 20% >|
| Download and unzip CybroIEXManager                          ||  {{hiq_building_automation:hiq_home:sw:cybroiexmanager.zip|CyBroIexManager}}     |
| Download and unzip Device Controller FWs                    ||  {{hiq_building_automation:hiq_home:sw:firmware.zip}}                                                                                |
| Start CybroIEXManager.exe                                   ||  {{hiq_building_automation:hiq_home:sw:cybroiexmanager_main.png?direct&200|}}                                                                |
| Scan for Home controller                      |    [Scan]    |  {{hiq_building_automation:hiq_home:sw:cybroiexmanager_scan_hc.png?direct&200|}}                                                             |
| Select Home Controller (NAD number - sticker on top of HC)                         ||  {{hiq_hardware:cybroiexmanager_scan_dc.png?direct&200|}}                                                             |
| Scan for connected IEX Device Controllers     |  [Scan IEX]  | :::                                                                                                         |
| For each connected device type open HIQ-DC FW.\\ \\ \\ \\ \\ \\ \\ \\ \\ There can be several hardware versions.\\ Hardware version is marked on the device\\ or on the PCB board. Check  [[en:hiq_home:methods:commissioning:firmware:compatibility|firmware compatibility]].\\ Versions not listed there are not\\ compatible and should not be used.  |  [Open]      |  {{hiq_building_automation:hiq_home:sw:cybroiexmanager_open_fw.png?direct&200|}}\\  {{hiq_building_automation:hiq_home:sw:hw_version.jpg?direct&200|}}                                                             | 
| Send Firmware to HIQ-DC                       |  [Send]      |  {{hiq_building_automation:hiq_home:sw:cybroiexmanager_send_fw.png?direct&200|}}                                                             | 
\\
-------------------------------------------------------------------------
==== HIQ applications ====

Windows:\\
{{hiq_building_automation:hiq_home:sw:hiq_configurator.exe|HIQ Configurator}}.\\
(Some antivirus programs or company firewalls does not allow the downloading of *.exe files. You can download {{hiq_building_automation:hiq_home:sw:hiq_configurator.zip|file in .zip package}} or you can disable the antivirus program.)\\
\\
Apple:\\
[[https://itunes.apple.com/si/app/hiq-commander/id1073060359?mt=8/|{{hiq_building_automation:hiq_home:sw:apple_app_store.png?nolink&300|}}]] \\
\\
Android:\\
[[https://play.google.com/store/apps/details?id=com.cybroiqcommander|{{hiq_building_automation:hiq_home:sw:google_play.png?nolink&300|}}]]\\
\\
---------------------
{{hiq_building_automation:hiq_home:sw:hiq_manual.pdf|}}\\

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International