Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 10.0.0.202,18.222.207.81
Lock expires at: 2025/04/08 10:43 (6 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Master Controller ======

**Advanced Controller**

<WRAP column 350px>

{{ :en:hiq_hw:pasted:mc-24-c3.png?nolink |}}

</WRAP>

<WRAP column 600px>

| Model number: ^ MC-24-05  | 24 VDC, 11 IO, 2 × RS232, RS485, IEX2 terminals                         |
| :::           ^ MC-24-06  | 24 VDC, 11 IO, 2 × RS232, RS485, IEX2 terminals, EnOcean                |
| Mounting:     | DIN rail(35mm), 6M, 106mm                                                                 ||
| Dimensions:   | 106x108x58mm                                                                        ||


</WRAP>

<WRAP clear></WRAP>

===== Features =====
 
  * 12 digital inputs
  * 10 relay outputs 8 A
  * 4 universal inputs/outputs
  * Ethernet, USB, IEX-2, 2×RS232
  * Enocean gateway (optional)
  * 24 VDC power supply   

===== Safety standards =====

EN 61010-1, EN 61010-2-201, EN 61131-2

<WRAP pagebreak></WRAP>

===== Technical specification =====

|< 35% 40% >|
| System clock                 |                               100MHz      |
| Instruction execution        |                      10ns per instruction |
| Program memory               |                    896Kb for user program |
| Data memory                  |                    64Kb for user variables|
| Data retention               |                                    7 days |
| RTC accuracy                 |               typ. ±2 sec per day at 25°C |
| Digital input (ix00..ix11)           |     24V 7mA, opto isolated, bidirectional |
| Digital input (ix12..ix15)   |     dry contact, internal pull-up 12V 3mA |
| Digital output (qx00..qx09)  |     drelay 8A/250VAC or 8A/30VDC resistive|
| Digital output (qx12..qx15)  |     NPN transistor 30V 1A                 |
| IEX-2 bus load               |     48 modules (Cybro + 47 IEX-2)         |
| IEX-2 baud rate              |     20, 50, 100 (default), 250, 500kbps   |
| IEX-2 cable length, 100kbps  |     100m (non-terminated)                 |
| IEX-2 cable length, 100kbps  |     300m (terminated)                     |
| IEX-2 cable length, 50kbps   |     500m (terminated)                     |
| Power supply                 |     24V (18..28V)                         |
| Power consumption            |50mA (no load), 180mA (10 relays, 4x 10Vout) |
| Power output (IEX-2)         |     24V 2A (limited by resettable fuse)   |
| Operating conditions         |     0..50°C, 0..85% rh non-condensing     |
| Degree of protection         |     IP20                                  |
| Installation category        |     III                                   |

===== Terminals =====