Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.
Currently locked by: 10.0.0.202,3.145.214.68
Lock expires at: 2025/03/15 05:14 (11 min)
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== RDX Charger======


<WRAP column 300px>

{{hiq_hardware:rdx_charger_wiki.png}}  

</WRAP>

<WRAP column 350px>

|< 100% 73% 27% >|
| Description ^ Order Code                                              |
| Robotina Dynamic Charger with type 2 cable and RFID card reader  ^ RDX-RF                                            |
| Robotina Dynamic Charger with type 2 cable, RFID card reader and residual current device ^ RDX-RF-R                                              |
| Robotina Dynamic Charger with type 2 cable, RFID card reader and IOT Linker^RDX-RF-I                                             |
| Robotina Dynamic Charger with type 2 cable, RFID card reader, residual current device and IOT linker^RDX-RF-RI                                  |
| Robotina Dynamic Charger with type 2 cable and QR code reader  ^ RDX-QR                                            |
| Robotina Dynamic Charger with type 2 cable, QR code reader and residual current device ^ RDX-QR-R                                              |
| Robotina Dynamic Charger with type 2 cable, QR code reader and IOT Linker^RDX-QR-I                                             |
| Robotina Dynamic Charger with type 2 cable, QR code reader, residual current device and IOT linker^RDX-QR-RI                                  |
                                   


</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * **Up to 22kW of charging power**
  * **Modern design with IP54 & IK10 standard**
  * **Suitable for indoor and outdoor use**
  * **Coloured LED light indicates charging status**
  * **Easy operability with one button on housing for charging modes & stop **
  * **Monitor & control charger operation via web-based cloud interface**
  * **Compatible with 3rd party software**
  * **Secure charger with remote locking option**
  * **Save by charging (economy charging) during off-peak hours**
  * **Charge with surplus energy (solar & wind energy)**
  * **Priority charging at the highest possible power**
  * **Dynamic load balancing keeps consumption power below max allowed (protect grid fuse/s)**
  * **Manage charging of electric vehicles (EV fleet)**
  * **Remote control of key consumers (heat pump, battery storage system,)**
  * **6mA DC residual current, overvoltage and undervoltage protection**
  * **RFID or QR access control to allow authorized usage only**
  * **Long range wireless power sensors for installation without cabling**
  * **Fully compliant with IEC 61851**




<WRAP pagebreak></WRAP>



 ===== Technical specifications =====

| Nominal voltage 	    |     1x230Vac 50/60Hz, 3x230/400Vac 50/60Hz|
| Maximum current |             1x32A, 3x32A|
| Maximum charging power |             22kW|
| Connector        	  |  Type2, 5m cable|
| Network connection         |  Ethernet 100M RJ45|
| Ingress protection   |            IP54|
| Impact resistance 	    |         IK10|
| Operating temperature	      |           -20°C to +45°C|
| Storage temperature  |                       -40°C to + 70°C|
| Charging pilot negative  |                     1mA, 20ms reaction time|   
| Residual direct current  |                     6mA, 200ms reaction time|   
| Standards   |                      IEC 61851|   

===== Dimensions =====

{{hiq_hardware:rdx_charger_dimensions.png}} 


===== Cable holder mounting options =====

{{hiq_energy:rdx_charger:montaza_6.png}}\\

===== Accessories =====


| **Description** 	    |     **Order Code**|
| Wireless external single-phase Power sensor kit|            **WPM1-E-D**|
| Wireless external three-phase Power sensor kit |             **WPM3-E-D**|
| External single-phase Power sensor|            **PM1-E-D**|
| External three-phase Power sensor|             **PM3-E-D**|
| Wireless Modbus bridge |  **WM-1**|
| Wireless relay, to control other loads in the building |  **WR-1**|
| Protective roof      |  **RDX-PR**|
| Freestanding set   |            **RDX-FS**|
| 4G LTE modem for IOT linker **This option is only possible for RDX Charger models that already have an integrated IOT linker**|            **IOT-L2-W**|