✎ en:ms_main:tms-8-3s []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Motion sensor ======

**Body temperature scanning device and mask wearing check**

</WRAP>

| Model number: ^ TMS-8-3S                               |

\\
===== Applications =====
  * Body temperature screening 
  * Mask wearing check 
  * Face recognition

</WRAP>

<WRAP clear></WRAP>
\\
===== Features =====
•	Support real time live detection
•	Support body temperature measurement and high temperature alarm
•	Support temperature data interface protocol docking
•	Support tracking of personnel movements under strong backlight conditions
•	Unique live face recognition algorithm to accurately recognize faces, face recognition time is less than 0.5s
•	Using Linux operating system, better system stability
•	The camera uses H.265 Main Profile encoding, compatible with NVR and other storage devices through the ONVIF protocol
•	Support TF card storage, pictures are stored continuously for 1 year or longer (depends on TF card capacity)
•	Mean time between failures MTBF>50,000 H 
•	IP65 waterproof and dust proof
•	Support 24,000 face matching library and 160,000 face recognition records
•	Rich interface protocol, support TCP/IP, UDP, RTP, RTSP, RTCP, HTTP, DNS, DDNS, DHCP, SMTP, UPNP, MQTT protocol, Windows/Linux
•	Built-in light sensor, automatically adjust the opening and closing of the fill light
•	Rich hardware interface （I/O, WG26, WG34, RJ45, USB, RS485）
•	8-inch IPS full-view HD display, no streaking and delay
•	Support automatic gain control and automatic white balance
•	3D noise reduction and fog-passing technology makes the monitoring picture under low illumination more clear
•	Support code stream and I frame interval setting
•	Support video area partial blocking
•	Support ROI coding
•	Support setting maximum exposure time
•	Support 2D noise reduction, 3D noise reduction
•	Support recording schedule time period and upload mode setting
•	Support video brightness, contrast, hue, saturation, gamma adjustment
•	Support setting the maximum auto exposure time
•	Support face intelligent exposure, face smart enhancement settings
•	Support QR code scanning
•	Temperature measurement accuracy	±0.3℃
•	Resolution 0.1℃
•	Temperature measurement distance	≤30cm
•	Response time	 300ms

\\
<WRAP pagebreak></WRAP>

===== Installation instruction =====

* Do not install the detector at position which faces direct or reflected sunlight or near windows with direct car headlight.

* Ensure that there are no obstructions (plants, screens, furniture etc.) in the field of view that may cause incorrect cover/operation of the detector.

* Avoid locating the detector in areas that contain equipment that may change the environment temperature rapidly (i.e. above radiator or under the air-conditioner)

* Install the detector at proper height on a rigid surface. Do not install the detector on vibrating surface.

* PIR detector is more sensitive to the motions “across” the detection zones than “toward” or “away”.

\\
===== Range and detection pattern =====

===== Technical specifications =====
| Power supply 	  |                                       24 VDC|
| Temperature 	  |                                 -20°C ~ 40°C|
| Range 	  |                                          7 m|

\\

===== Dimensions =====

===== Mounting =====

1. Separate the bottom-stand from the sensor body by turning it clockwise against the sensor body.

2. Pull the wires through the hole in the middle of the bottom-stand.

3. Fix the bottom-stand on the selected location with two screws as shown on the drawing.

4. Connect the wires.

5. Fix the sensor body on the bottom-stand and turn anti-clockwise.

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International