====== Manufacture ======

===== HC-IQ =====

FW: {{ hiq_energy:goflex_hems:downloads:goflex_hems_v1.0.0.cyp |}}

===== GW-WN-W =====

Configure **DIP SW** to **1 = ON, 2 - 8 = OFF**
===== Power-meters =====

Modbus settings for power-meters we supply: **9600 8n2; ID: 149**

==== Eastron ====

Factory setting: **2400 8n1; ID: 1**

<wrap hi>Put power-meter in set mode by pressing button until -SET- is displayed on power-meter display.</wrap>

|   Parameter        |  Address (hex)  |  Format  |  Default value (hex)     |    New value (hex)         |
| Parity / Stop bits |  40019 (00 12)  |  float   |  0 (00 00 00 00) = n1    |    3 (40 40 00 00) = n2    |
| Meter ID           |  40021 (00 14)  |  float   |  1 (3F 80 00 00) = 1     |  149 (43 15 00 00) = 149   |
| Baud Rate          |  40029 (00 1C)  |  float   |  0 (00 00 00 00) = 2400  |    2 (40 00 00 00) = 9600  |

CyBro-2-230-E configuring SW: {{ hiq_energy:goflex_hems:downloads:eastron_config.zip |}}
==== Iskra ====

Power-meters are supplied according to our specifications - no configuration needed before sending.

===== AiR-12 =====

Set **NAD** to **700**

===== TS-H =====

Set **NAD** to **800 - 807**