====== Master Controller ======

**Advanced Controller**

<WRAP column 350px>

{{:en:hiq_hw:pasted:mc-230.png}}

</WRAP>

<WRAP column 650px>

| Model number: ^ MC-230-01  | 230 VAC, 11 IO, Enocean, 2 × RS232, RS485, IEX2 terminals             |
| :::           ^ MC-230-02  | 230 VAC, 11 IO, 2 × RS232, RS485, IEX2 terminals                      |
| :::           ^ MC-230-03  | 230 VAC, 11 IO, Enocean, 2 × RS232, isolated RS485, IEX2 terminals    |
| :::           ^ MC-230-04  | 230 VAC, 11 IO, 2 × RS232, isolated RS485, IEX2 terminals             |
| Mounting:     | DIN rail (35mm), 6M, 106mm                                                               ||
| Dimensions:   | 106x108x58mm                                                                      ||


</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * 3 digital inputs
  * 4 relay outputs 8 A
  * 4 universal inputs/outputs
  * Ethernet, USB, IEX-2, 2×RS232, 1×RS485 (optional isolated)
  * Enocean gateway (optional)
  * 230 VAC or 24 VDC power supply (use only one option!)

===== Safety standards =====

EN 61010-1, EN 61010-2-201, EN 61131-2

<WRAP pagebreak></WRAP>

===== Technical specification =====

|< 35% 40% >|
| Relay outputs:               |    8A/250VAC resistive, 8A/30VDC resistive |
| Communication:               |    Ethernet, 2x RS232, 1x RS485, IEX-2 bus |
| Nominal power rating:        |                           230 VAC or 24 VDC|
| Power consumption:           |                  typ. 1W (no load), 10W max|
| Power output:                |       24V 200mA (with 230 VAC power supply)|
| Ingress protection:          |                                       IP20 |
| Operating temperature:       |                                    0..50°C |
| Storage temperature:         |                                  -20..75°C |
| Relative humidity:           |                                 0..85% n/c |
| Input type(ix00..ix02):      |      dry contact, internal pull-up 12V 2mA |
| Cable lenght:                |                                         50m|
| COM1 type                    |                             RS485 two wire |
| Transmit/receive             |                        automatic switching |
|                              |                                            |
| MAX recommended output power per relay:    |                              |
| - incandescent / halogen 230V         |                         800 W|
| - halogen 12 V with transformer       |                         400 W|
| - fluorescent with electronic ballast |                         400 W|
| - parallel compensated fluo lamps     |                 250 W / 30 uF|
| - electric heater                     |                        1400 W|
| Total output power (all relays):      |                        4000 W|

<WRAP pagebreak></WRAP>
===== Terminals =====

{{:en:hiq_hw:pasted:mc-230-01_terminals.png}}