====== Wireless on wall power sensor ======

**Wireless on wall rail power meter, external power relay switching and consumer measurement**

<WRAP column 350px>

{{ hiq_energy:goflex_hems:hardware:pm1-w.png?nolink |}}

</WRAP>

<WRAP column 300px>

| Model number: ^ PM1-WN-W                      |
| Mounting:     | On wall                       |
| Dimensions:   | 76 × 116 × 25 mm              | 

^ Used for single phase managed consumer                           ||
| ✔ | toggling power supply using external power relay              |
| ✔ | measuring power and energy using clamp-on current transformer |

</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * Wireless load management, external power-relay control
  * Consumer measurements, clamp-on current transformer

===== General description =====

Wireless on wall power meter PM1-WN-W is a on wall mounted control unit. It can switch on/off an external power-relay and measure active power and energy consumption. 

This device has to be directly and continuously main powered. For network purposes, it is a Router (Repeater) i.e. it has function of maintaining radio traffic from and to other similar devices and it can also act as a parent device for battery-powered sensors of the same family.

<WRAP pagebreak></WRAP>

===== Technical specifications =====

|< 35% 40% >|
| POWER SUPPLY                  |                 85-250 Vac; 50/60 Hz |
| WIRELESS CHARACTERISTICS      |                  2405 MHz ÷ 2480 MHz |
| :::                           |                      DSSS Modulation |
| :::                           |     Nominal transmission Power +3dBm |
| :::                           |              IEEE 802.15.4 compliant |
| :::                           |                 Stack EmberZNet3.5.x |
| :::                           |                      Stack version 0 |
| :::                           |               Proprietary profile ID |
| :::                           |           Proprietary encryption key |
| MEASURES                      |                 Energy consumed [Wh] |
| :::                           |                     Active Power [W] |
| :::                           |            Time of measurement [sec] |
| MAXIMUM MEASURED LOAD         |                                15 kW |
| RELAY CHARACTERISTICS         |  Contacts 40mA 250V (resistive load) |
| CONNECTIONS                   |                      Terminal blocks |
| OPERATING CONDITIONS          |                          -10 + 55 °C |
| PROTECTION CLASS              |                                 IP30 |

===== Terminals =====

<WRAP column 600px>

|< 100% 14% 3% 3% 20% 20% >|
^    PM1-WN-W                  ||^  CT  ^   Power source   ^  Measured load  ^  Switched load  |
| PE             |  PE   |   1   |  /   |     PE           |       /         |        /        |
| :::            |  PE   |   1a  |  /   |     /            |       PE        |        PE       |
| Neutral        |  N    |   2   |  /   |     N            |       /         |        /        |
| :::            |  N    |   2a  |  /   |     /            |       N         |        N        |
| Phase IN / CT  |  L    |   3   |  BK  |     L            |       L         |        /        |
| CT             |  L    |   3a  |  RD  |     /            |       /         |        /        |
| Phase OUT      |  L    |   3b  |  /   |     /            |       /         |        L        |

</WRAP>

<WRAP column 300px>

{{ hiq_energy:goflex_hems:hardware:rl1_terminals.png?nolink |}}

</WRAP>
<WRAP clear></WRAP>

===== Connection =====

{{ hiq_energy:goflex_hems:hardware:pm1-w_wiring.png?nolink |}}