====== Wireless relay ======
**Single-phase power relay and consumer measurement**
{{ hiq_energy:goflex_hems:hardware:rl1.png?nolink |}}
| Model number: ^ RL1-WN-W |
| Mounting: | On wall |
| Dimensions: | 76 × 116 × 25 mm |
^ Used for single phase managed consumer ||
| ✔ | toggling power supply |
| ✔ | measuring power and energy |
===== Applications =====
* Wireless power-relay with consumer measurements
===== Features =====
* Wireless load management
* Consumer measurements
===== General description =====
Wireless relay RL1-WN-W is a wall mounted control unit. It can switch on/off an electric load, measure active power and energy consumption.
This device has to be directly and continuously main powered. For network purposes, it is a Router (Repeater) i.e. it has function of maintaining radio traffic from and to other similar devices and it can also act as a parent device for battery-powered sensors of the same family.
===== Technical specifications =====
|< 35% 40% >|
| POWER SUPPLY | 85-250 Vac; 50/60 Hz |
| WIRELESS CHARACTERISTICS | 2405 MHz ÷ 2480 MHz |
| ::: | DSSS Modulation |
| ::: | Nominal transmission Power +3dBm |
| ::: | IEEE 802.15.4 compliant |
| ::: | Stack EmberZNet3.5.x |
| ::: | Stack version 0 |
| ::: | Proprietary profile ID |
| ::: | Proprietary encryption key |
| MEASURES | Energy consumed [Wh] |
| ::: | Active Power [W] |
| ::: | Time of measurement [sec] |
| RELAY CHARACTERISTICS | Contacts 10A 250V (resistive load) |
| CONNECTIONS | Terminal blocks |
| OPERATING CONDITIONS | -10 + 55 °C |
| PROTECTION CLASS | IP30 |
===== Terminals =====
|< 100% 25% 4% 4% 33% >|
^ RL1-WN-W ||^ Power source ^ Consumer |
| PE | PE | 1 | PE | / |
| ::: | PE | 1a | / | PE |
| Neutral | N | 2 | N | / |
| ::: | N | 2a | / | N |
| Phase IN | L | 3 | L | / |
| Phase OUT | L | 3a | / | L |
| Not used | L | 3b | / | / |
{{ hiq_energy:goflex_hems:hardware:rl1_terminals.png?nolink |}}
===== Connection =====
{{ hiq_energy:goflex_hems:hardware:rl1_wiring.png?nolink&500 |}}