====== Temperature and Humidity Sensor ======

<WRAP column 600px>

{{:hiq_hardware:rb-100-th_wiki.png}} 



</WRAP>

<WRAP column 350px>

|< 100% 35% 65% >|
| Model number: ^ RB-100-TH                                        |                                       
| Mounting:     | In-wall, dose                             |
| Dimensions:   | 85 x 116 x 44 mm                               |
| Connection:   | RS485 to HIQ MC controller or Cybro|
| Frame color: | Black     |

</WRAP>

===== Applications =====
  * Widely used in building automation 
  * Climate and HVAC signal collection
  * Integrated use of temperature and humidity and chemical industries etc.  

===== Features =====
  * High measurement accuracy
  * Built-in high-performance microprocessor
  * Multiple probes available
  * Integrated use of temperature and humidity
  * Superior performance and long-term stability  

===== Technical specifications =====


| Power supply:            | 10-30VDC  Note: 0-10VDC output (limited to 24VDC Power Supply)      |
| Signal output:                 | 4-20mA/0-5VDC/0-10VDC RS485 output (Modbus protocol)  |
| Digital output:                 | Device address 1-255, default 1  |
|                 | Device baud rate 2400, 4800, 9600 optional, default 4800                        |
|                  | Byte format 8-bit data bit, 1 stop bit, no parity                                    |
| Measuring temperature             | -40°C to +80°C                                        |
| Measuring humidity :             | Relative humidity 0%-100% RH|
| Temperature accuracy  :             | 0.5°C (25°C)|
| Humidity accuracy  :             | 3% RH (5%RH-95%RH, 25°C) |
| Long-term stability  :             | Temperature < 0.1°C/year, Humidity <0.1%RH/year |
| Response time  :             | Temperature <18sec (1m/s wind speed), Humidity < 6sec (1m/s wind speed) |

===== Wiring ===== 


{{ hiq_hardware:rb-100-th_wiring.png  }}

<WRAP pagebreak></WRAP>