load_set[i] | bit | R/W | Managed load state; 0=off, 1=on; i = 10..17 |
analog_out[i] | int | R/W | Analog output value in % i = 10..13 |
timetable_cloud_once[i] | bit | RO | Enabled cloud optimization for “once” actions; 0=disabled, 1=enabled; i=0..7 |
timetable_cloud_recurring[i] | bit | RO | Enabled cloud optimization for “recurring” actions; 0=disabled, 1=enabled; i=0..7 |
timetable_analog_optimization[i] | bit | RO | Enabled cloud optimization for analog timetable; 0=disabled, 1=enabled; i=0..3 |
optimization_index[i] | int | RW | Timetable optimization index (0=broadcast = all timetables); i=0..50 |
optimization_start[i] | int | RW | Timetable optimization start time; hhmmw; hh=hour, mm=minute, w=weekday(1=monday); i=0..50 |
optimization_time[i] | int | RW | Timetable optimization period in min; i=0..50 |
optimization_command[i] | int | RW | Timetable optimization command, auto set to 0 after being processed - see following table; i=0..50 |
optimization_value[i] | int | RW | Timetable optimization value , depends of optimization_command - see following table; i=0..50 |
Variable optimization_command triggers timetable manipulation process so make sure to set all other variables before.
optimization_command | optimization_value |
||
| 1 | managed load once actions | 0 | Set OFF |
| 1 | Set ON | ||
| -1 | Delete | ||
| 2 | managed load recurring actions | 0 | Set OFF |
| 1 | Set ON | ||
| -1 | Delete | ||
| 3 | tariff timetable | 0 | Set LO |
| 1 | Set HI | ||
| 2 | Set DYNAMIC | ||
| -1 | Delete Dynamic | ||
| 4 | set mask | 0..0xFF | Set once on/off as per bit value |
| 5 | analog timetable | 0..100 | Set 0..100% |
| -1 | Delete Analog | ||
| 6 | battery setpoint | -100..0 | Set discharge 0..100% |
| 0..100 | Set charge 0..100% | ||
| -31768 | Set auto | ||