Commissioning

HEMS controller HC-IQ-HEMS and all communication interfaces are supplied with preinstalled firmware.

For system configuration use HIQ HEMS Configurator .

1. Connect only one new power meter at the time.
2. In HIQ HEMS Configurator go to settings page. New power-meter should be detected (Address and Type should be displayed).
3. Long-press button on power meter until -SET- is displayed.
4. Press New address and enter new address according to following table.

1. In HIQ HEMS Configurator go to wireless page
2. Click on device which will be added
3. Wait for network open - waiting device status.
4. Press button on device.
5. Wait until device is addressed and configured.

Procedure can be interrupted with “close network” button.

1. Reset device:
   • power off wireless device for a few seconds.
   • After powering on wait for a few seconds for device to boot on.
   • Press and hold button, LED indicator will go off, then green and at the end red.
   • Release button.
2. In HIQ HEMS Configurator go to wireless page
3. Reset device should have error state (yellow sign with exclamation)
4. Click on reset device to clear place.

1. In HIQ HEMS Configurator go to wireless page
2. Press icon for control device (wireless enocean push-button) to be configured
3. On control device press 0 (off) button
4. On control device press 1 (on) button

1. Adjust sensor address with DIP-switches according following table
2. In HIQ HEMS Configurator click on sensor which will be added
3. Wait for network open - waiting device status
4. Power on and pres button on sensor
5. Wait until sensor is configured

Procedure can be interrupted with “close network” button.

Sensor	Address	DIP switch settings
S1	60
S2	61
S3	62
S4	63
S5	64
S6	65
S7	66
S8	67

1. Reset sensor:
   • Power off sensor for few seconds
   • Reconnect sensor power supply
   • After sensor power on (but within 20 sec) press and hold button for at least 6 sec
2. In HIQ HEMS Configurator reset device should show error
3. Click on error icon to free occupied space