HEMS v1.2.x wiring
| MC-230 |
|---|
| Wiring of default configuration. NOTE: several different configurations can be configured with HEMS Configurator. |
 |
| IOT-L2-2 |
|---|
 |
| Network (LAN or LTE 4G modem) → MC-230 and IOT-L2-2 Optionally: - PC with HEMS configurator - PV inverter - Hybrid inverter (battery storage system) - EV charger NOTE: When you change network configuration, MC-230 and IOT-L2-2 must be reset. |
|---|
| Default connection to the LAN network: |
 |
| Optional LAN connections: |
 |
| Default connection via LTE 4G modem: |
| NOTE: All connected devices will have internet access via LTE modem which can result in high costs on your LTE account. |
 |
| Optional LTE 4G modem connection: |
 |
| NOTE: Specific network requirements, i.e. static IP address can be configured on the cloud service. Please contact support. |
| PM3-I-D |
|---|
 |
| PM1-E-D |
|---|
 |
| PM1-E-D-CT |
|---|
 |
| PM3-E-D-CT |
|---|
 |
| WM-1 |
|---|
 |
| Power-sensors orientation |
|---|
 |
| Control consumer by external signal |
|---|
| Connect external source to control device, e.g. thermostat signal on IX0 to control temperature by enabling/disabling connected device on QX0. |
 |
| Set analog for consumer 1 |
|---|
| Connect analog device to IO14 for analog signal 0-10V or to IO15 for PWM signal (f=1kHz). Analog load is possible to set in configurator for consumer 1 only and reserved outputs are on IO14 & IO15. |
 |