en:hems_v1_2_0:methods_resources:wiring
This is an old revision of the document!
HEMS v1.2.x wiring
| MC-230 |
|---|
| Wiring of default configuration. NOTE: several different configurations can be configured with HEMS Configurator. |
 |
| IOT-L2-2 |
|---|
 |
| Network → MC-230, IOT-L2-2 and optionally LTE 4G modem |
|---|
| Default connection to the LAN: |
 |
| Optional LAN connections: |
 |
 |
| Default connection via LTE 4G modem: |
| NOTE: All connected devices will have internet access via LTE modem which can result in high costs on your LTE account. |
 |
| Optional LTE 4G modem connection: |
 |
| NOTE: Specific network requirements, i.e. static IP address can be configured on the cloud service. Please contact support. |
| PM3-I-D |
|---|
 |
| PM1-E-D |
|---|
 |
| PM1-E-D-CT |
|---|
 |
| PM3-E-D-CT |
|---|
 |
| WM-1 |
|---|
 |
| Power-sensors orientation |
|---|
 |
| Control consumer by external signal |
|---|
| Connect external source to control device, e.g. thermostat signal on IX0 to control temperature by enabling/disabling connected device on QX0. |
 |
en/hems_v1_2_0/methods_resources/wiring.1636125164.txt.gz · Last modified: 2021/11/05 15:12 by saso_santelj