en:robotina_charger:commissioning
This is an old revision of the document!
Table of Contents
Commissioning
Strictly follow Safety instructions!
Mounting
Mount Robotina charger (EVSE), PM1-E-D & PM3-E-D power sensor as well as WM-1 & WR-1 to a suitable place. For more details, please read Hardware.
Wiring
Connect EVSE to the home LAN. Wire WM-1 module with power sensor and WR-1 relay with device (e.g. heat pump, el. radiator). For more details, please read Wiring.
Configuration
Install and run Robotina Charger on your PC. Use autodetect button to discover EVSE in local network. Enter names, choose icons for all sources and consumers. Add WM-1 and WR-1 module by running WM / WR binding and scan for power sensors and wireless relay.
en/robotina_charger/commissioning.1671027133.txt.gz ยท Last modified: by gdzampo