User Tools

Site Tools


en:hiq_hw:pm1-wn-w

Wireless on wall power sensor

Wireless on wall rail power meter, external power relay switching and consumer measurement

Model number: PM1-WN-W
Mounting: On wall
Dimensions: 76 × 116 × 25 mm
Used for single phase managed consumer
toggling power supply using external power relay
measuring power and energy using clamp-on current transformer

Features

  • Wireless load management, external power-relay control
  • Consumer measurements, clamp-on current transformer

General description

Wireless on wall power meter PM1-WN-W is a on wall mounted control unit. It can switch on/off an external power-relay and measure active power and energy consumption.

This device has to be directly and continuously main powered. For network purposes, it is a Router (Repeater) i.e. it has function of maintaining radio traffic from and to other similar devices and it can also act as a parent device for battery-powered sensors of the same family.

Technical specifications

POWER SUPPLY 85-250 Vac; 50/60 Hz
WIRELESS CHARACTERISTICS 2405 MHz ÷ 2480 MHz
DSSS Modulation
Nominal transmission Power +3dBm
IEEE 802.15.4 compliant
Stack EmberZNet3.5.x
Stack version 0
Proprietary profile ID
Proprietary encryption key
MEASURES Energy consumed [Wh]
Active Power [W]
Time of measurement [sec]
MAXIMUM MEASURED LOAD 15 kW
RELAY CHARACTERISTICS Contacts 40mA 250V (resistive load)
CONNECTIONS Terminal blocks
OPERATING CONDITIONS -10 + 55 °C
PROTECTION CLASS IP30

Terminals

PM1-WN-W CT Power source Measured load Switched load
PE PE 1 / PE / /
PE 1a / / PE PE
Neutral N 2 / N / /
N 2a / / N N
Phase IN / CT L 3 BK L L /
CT L 3a RD / / /
Phase OUT L 3b / / / L

Connection

en/hiq_hw/pm1-wn-w.txt · Last modified: 2019/08/21 09:38 by goran.kocjancic