Differences

This shows you the differences between two versions of the page.

--- en:hiq_home:methods:commissioning [2021/06/08 10:28] – [3. HIQ Configuration and firmware update] saso_santelj
+++ en:hiq_home:methods:commissioning [2022/10/17 12:39] (current) – [3. HIQ Configuration and firmware update] saso_santelj
@@ Line 16: / Line 16: @@
-On “System” page press “Autodetect” button to detect and then select your Home controller (HC). If there are many controlles you have to choose appropriate NAD number (written on the top of HC). Repeat next steps for all controllers.\\
+On “System” page press “Autodetect” button to detect and then select your Home controller (HC). If there are many controllers you have to choose appropriate NAD number (written on the top or side of HC / MC). Repeat next steps for all controllers.\\
 {{hiq_building_automation:hiq_home:methods:system.jpg?direct&400}}
-According to the different configurations of hardware and software on your computer it can happen that Autodetect fails. In this case you need to make [[en:hiq_home:applications:configurator:manual_detect|manual HC-IQ detect]].
+According to the different configurations of hardware and software on your computer it can happen that Autodetect fails. In this case "Enter NAD manually".
 **Autoaddress**\\
@@ Line 27: / Line 27: @@
 Devices inside switchboard are addressed sequentially, from left to right. Devices outside of switchboard (field modules) are addressed in order of ascending serial numbers - lowest serial number gets the first address, second lowest the second and so on.\\
-Note that [[en:hiq_hw:th-1m-iq|thermostat]] with lowest serial number controls [[en:hiq_hw:fc-1-iq|FC controller]] with lowest serial number and so on.\\
+Note that [[en:hiq_hw:th-1t-iq|thermostat]] with lowest serial number controls [[en:hiq_hw:fc-1-iq|FC controller]] with lowest serial number and so on.\\
 {{hiq_building_automation:hiq_home:methods:autoaddress_modules.jpg?direct&400}}
@@ Line 47: / Line 47: @@
 ^**Home Controller**                                                                                                                                                                |||
 |Home controller               |  [[en:hiq_hw:hc-iq|HC-IQ]]                       |  {{hiq_building_automation:hiq_home:sw:hc-iq-v1216.cyp|v1.2.16}}  |   CyBro-2  |
-|:::                           |  [[http://www.cybrotech.com/product/cybro-3/|Cybro-3]]                       |  {{hiq_building_automation:hiq_home:sw:hc-iq-v610.cyp|v6.1.0}}    |   CyBro-3     |
+|:::                           |  [[http://www.cybrotech.com/product/cybro-3/|Cybro-3]]                       |  {{hiq_building_automation:hiq_home:sw:hc-iq-v615a.cyp|v6.1.5a}}    |   CyBro-3     |
 |:::                           |  [[en:hiq_hw:mc-230|MC-xx-xx]]                       |  :::                                                              |   MC          |
 ^**Device Controllers**                                                                  |||
-|Light controller              |  [[en:hiq_hw:lc-10-iq|LC-10-IQ]]             |  {{hiq_building_automation:hiq_home:sw:lc-10-iq-v3206.zip |v3206}}  |    Bio-20R  v1.1     |
+|Light controller              |  [[en:hiq_hw:lc-10-iq|LC-10-IQ]]             |  {{hiq_building_automation:hiq_home:sw:lc-10-iq-v3207.zip |v3207}}  |    Bio-20R  v1.1     |
 |LED stripe dimmer             |  [[en:hiq_hw:ld-v4-iq|LD-V4-IQ]]             |  {{hiq_building_automation:hiq_home:sw:ld-v4-iq-v3303.zip |v3303}}  |    v1.0        |
 |:::                           |  :::                                         |  {{hiq_building_automation:hiq_home:sw:ld-v4-iq-v3307.zip |v3307}}  |    v1.1, v1.2         |
 |Light dimmers driver          |  [[en:hiq_hw:ld-p4-iq|LD-P4-IQ]]             |  {{hiq_building_automation:hiq_home:sw:ld-p4-iq-v3023.zip |v3023}}  |     v1.0, v1.1      |
-|DALI dimmer                   |  [[en:hiq_hw:ld-d8-iq|LD-D8-IQ]]             |  {{hiq_building_automation:hiq_home:sw:ld-d8-iq-v3216.zip |v3216}}  |    LC-DC  v1.1    |
+|DALI dimmer                   |  [[en:hiq_hw:ld-d8-iq|LD-D8-IQ]]             |  {{hiq_building_automation:hiq_home:sw:ld-d8-iq-v3215.zip |v3215}}  |    LC-DC  v1.1    |
-|Blinds controller             |  [[en:hiq_hw:bc-5-iq|BC-5-IQ]]               |  {{hiq_building_automation:hiq_home:sw:bc-5-iq-v3209.zip  |v3209}}  |    Bio-20R  v1.1   |
+|Blinds controller             |  [[en:hiq_hw:bc-5-iq|BC-5-IQ]]               |  {{hiq_building_automation:hiq_home:sw:bc-5-iq-v3210.zip  |v3210}}  |    Bio-20R  v1.1   |
-|Scene touch panel             |  [[en:hiq_hw:sc-4t-iq|SC-4T-IQ]]             |  {{hiq_building_automation:hiq_home:sw:sc-4t-io-v3001.zip |v3001 (Cybro-3/MC)}}  |     SC-4T v1.0, v1.1   |
+|Scene touch panel             |  [[en:hiq_hw:sc-4t-iq|SC-4T-IQ]]             |  {{hiq_building_automation:hiq_home:sw:sc-4-iq-v3403.zip  |v3403}}  |     SC-4T v1.0, v1.1   |
-|Scene controller              |  [[en:hiq_hw:sc-4s-iq|SC-4S-IQ]]             |  :::                                                                |     SW-W3 v1.0   |
-|Scene touch panel             |  [[en:hiq_hw:sc-4t-iq|SC-4T-IQ]]             |  {{hiq_building_automation:hiq_home:sw:sc-4t-io-v3403.zip |v3403 (HC-IQ)}}  |     SC-4T v1.0, v1.1   |
 |Scene controller              |  [[en:hiq_hw:sc-4s-iq|SC-4S-IQ]]             |  :::                                                                |     SW-W3 v1.0   |
 |Thermostat                    |  [[en:hiq_hw:th-1m-iq|TH-1M-IQ]]             |  {{hiq_building_automation:hiq_home:sw:th-1-iq-v3215-hw12.zip |v3215-hw12}}  |   OP-6 v1.1, v1.2   |