en:hems_v1_2_0:methods_resources:wiring
This is an old revision of the document!
HEMS v1.2.x wiring
| MC-230 |
|---|
| Wiring of default configuration. NOTE: several different configurations can be configured with HEMS Configurator. |
 |
| IOT-L2-2 |
|---|
 |
| Network → MC-230, IOT-L2-2 and optionally 4G LTE modem |
|---|
| Default connection to the LAN: |
 |
| Default connection via 4G LTE modem: |
 |
| Optional connection to the LAN: NOTE: optional connection has to be configured on the cloud service. Please contact support. The same applies to specific network requirements, i.e. static IP address. |
 |
| PM3-I-D |
|---|
 |
| PM1-E-D |
|---|
 |
| PM1-E-D-CT |
|---|
 |
| PM3-E-D-CT |
|---|
 |
| WM-1 |
|---|
 |
| Power-sensors orientation |
|---|
 |
| Control consumer by external signal |
|---|
| Connect external source to control device, e.g. thermostat signal on IX0 to control temperature by enabling/disabling connected device on QX0. |
 |
en/hems_v1_2_0/methods_resources/wiring.1636033725.txt.gz · Last modified: 2021/11/04 13:48 by saso_santelj