Basic characteristics:

• many lights and push-buttons, usually in several places
• time-consuming adjustment of lighting to actual needs

• Scenes triggered by keys:
  • Smaller number of keys
  • Easier, faster adjustment of lighting to actual needs
  • Easy adaptation to lifestyle change
• Scenes can also be triggered automatically (schedule, at night)
• Lights can be included in other scenes (turn off everything when leaving home)

• Set the scene 0:
  1. Select scene 0 (field in cross section 00_ and _0 in the center table), which becomes bordered by a blue line.
  2. Mark the lights 0 to 9 (first row in the right table) to make the fields highlighted in blue.
  3. Click the [on] button below the light table. The highlighted fields will be bordered in gray and “on” will be displayed in them.

• Set the scene 1:
  1. Select scene 1 (field in cross section 00_ and _1 in the center table), which becomes bordered by a blue line.
  2. Mark the lights 0 to 9 (first row in the right table) to make the fields highlighted in blue.
  3. Click the [off] button below the light table. The highlighted fields will be bordered in gray and “off” will be displayed in them.
  4. Mark the light 4 (field in cross section 00_ and _4 in the center table) to make the field highlighted in blue.
  5. Click the [on] button below the light table. All light fields will be bordered in gray, all except light 4 will display off, light 4 will display “on”.

• Repeat the procedure for scenes 2 to 4

• Sets the input for scene 0:
  1. Select scene 0 (field in cross section 00_ and _0 in the center table), which becomes bordered by a blue line.
  2. Mark the inputs 3 and 6 (fields below _3 and _6 in first row of the left table) to make the fields highlighted in blue.
  3. Click the [toggle] button below the inputs table. The highlighted fields will be bordered in gray and “tg” will be displayed in them.

• Sets the input for scene 1:
  1. Select scene 1, which becomes bordered by a blue line.
  2. Mark the inputs 0 and 7 to make the fields highlighted in blue.
  3. Click the [toggle] button below the inputs table. The highlighted fields will be bordered in gray and “tg” will be displayed in them.

• Repeat the procedure for scenes 2 to 4