en:hiq_hw:pm1-wn-d
Table of Contents
Wireless DIN rail power sensor
Wireless DIN rail power meter, external power relay switching and consumer measurement
| Model number: | PM1-WN-D |
|---|---|
| Mounting: | DIN rail, 4M |
| Dimensions: | 72 × 110 × 60 mm |
| Used for single phase managed consumer | |
|---|---|
| ✔ | toggling power supply using external power relay |
| ✔ | measuring power and energy using clamp-on current transformer |
Features
- Wireless load management, external power-relay control
- Consumer measurements, clamp-on current transformer
General description
Wireless DIN rail power meter PM1-WN-D is a DIN rail mounted control unit. It can switch on/off an external power-relay and measure active power and energy consumption.
This device has to be directly and continuously main powered. For network purposes, it is a Router (Repeater) i.e. it has function of maintaining radio traffic from and to other similar devices and it can also act as a parent device for battery-powered sensors of the same family.
Technical specifications
| POWER SUPPLY | 85-250 Vac; 50/60 Hz |
| WIRELESS CHARACTERISTICS | 2405 MHz ÷ 2480 MHz |
| DSSS Modulation | |
| Nominal transmission Power +3dBm | |
| IEEE 802.15.4 compliant | |
| Stack EmberZNet3.5.x | |
| Stack version 0 | |
| Proprietary profile ID | |
| Proprietary encryption key | |
| MEASURES | Energy consumed [Wh] |
| Active Power [W] | |
| Time of measurement [sec] | |
| MAXIMUM LOAD | 15 kW |
| RELAY CHARACTERISTICS | Contacts 10A 250V (resistive load) |
| CONNECTIONS | Terminal blocks |
| OPERATING CONDITIONS | -10 + 55 °C |
| PROTECTION CLASS | IP30 |
Terminals
| PM1-WN-D | |||
|---|---|---|---|
| MAINS | 16 | Power source | L |
| 17 | N | ||
| CT | 2 | Current transformer | black |
| 3 | red | ||
| Relay | 6 | Power relay | coil power supply |
| 7 | coil | ||
Connection
en/hiq_hw/pm1-wn-d.txt · Last modified: 2019/08/21 09:38 by goran.kocjancic