Three phase power sensor

3-phase power-sensor

Model number:	PM3-E-D
Connect to:	MC-230
Connect to:	RS485 power sensor bus A - B
Mounting:	DIN rail, 1M, 18 mm
Dimensions:	66 × 72 × 100 mm

Used for measuring power and energy of
✔	single/three-phase energy sources
✔	single/three-phase energy consumers

Applications

Digital multi-function power sensor for single/three phase networks

Features

DIN rail mounting
Three Phase 100A Direct Fed
Accuracy Class 0.5 (Active Energy)
Bi-directlonal Measurement for kW and kWh
Configurable Pulsed output (Import/ Export/Nett kWh)
Line Frequency
Power, maximum power demand and power factor
Active energy imported and exported
Reactive energy imported and exported
Supported Modbus

General description

PM3-E-D measures and displays the characteristics of 1p2w, 3p3w and 3p4w supplies, including voltage, frequency, current, power, active and reactive energy, imported or exported, harmonic etc. Bi-directional measurement makes it an ideal choice for Solar PV measurement. The units support Max. 100A direct connection, saving the cost and avoiding the trouble to connect external CTs. Two pulse outputs and 1 communication port (Modbus) are provided for remote monitoring. The unit has been approved to meet the requirements of EU Directive 2014/32/EU.

Technical specifications

Technical Data
Operating Humidity	≤ 90%
Storage Humidity	≤ 95%
Operating Temperature	-25°C - +50°C
Storage Temperature	-40°C - +70°C
Mounting	DIN rail (DIN 43880)
Sealing	IP51 Indoor
Frequency	50Hz or 60Hz
Power Consumption	≤ 10W
Accuracy
Voltage, Current	0.2% of range maximum
Frequency	0.1% of Mid-Frequency
Power Factor	1% of Unity (0.01)
Current transformer
Frequency	50-60 Hz
Max current	100 A
Modbus
Transmission Mode	RS485 Half-Duplex
Protocol	Modbus RTU
Baud Rate	2400bps - 38400bps
Address Range	1-247
Parity	EVEN/ODD/NONE
Data Bit	8
Stop Bit	1 or 2

Table of Contents

Three phase power sensor

Applications

Features

General description

Technical specifications

Installation & Dimensions